next up previous contents index
Next: Character Variables and Implicit Up: Variables and Expressions Previous: GILDAS Images   Contents   Index

GILDAS Headers

The DEFINE IMAGE command allows SIC to access not only to the content of an image (the data value), but also to all its associated parameters; DEFINE HEADER allows access only to these associated parameters. The header variables have names derived from the generic name by adding the special character % and an extension (such as e.g. NDIM for the number of dimensions) to the generic header name. For example, command DEFINE HEADER VAR file.gdf READ also creates the following variables:

       VAR%GENE       Integer        Length of general section
       VAR%NDIM       Integer        Number of dimensions (ReadOnly)
       VAR%DIM        Integer[7]     Dimensions           (ReadOnly)
       VAR%CONVERT    Double[3,7]    Conversion formulae for the 7 axes:
                                     Reference pixel,
                                     Value at reference pixel,
                                     Increment
       VAR%BLAN       Integer        Length of blanking section
       VAR%BLANK      Real[2]        Blanking and tolerance
       VAR%EXTREMA    Integer        Length of extrema section
       VAR%MAX        Real           Maximum
       VAR%MIN        Real           Minimum
       VAR%MINLOC     Integer[7]     Position of min value
       VAR%MAXLOC     Integer[7]     Position of max value
       VAR%DESC       Integer        Length of units and system section
       VAR%UNIT       Char*12        Image unit
       VAR%UNIT1      Char*12        First axis type
       VAR%UNIT2      Char*12        Second axis type
       VAR%UNIT3      Char*12        Third axis type
       VAR%UNIT4      Char*12        Fourth axis type
       VAR%SYSTEM     Char*12        Coordinate system
       VAR%POSI       Integer        Length of position section
       VAR%SOURCE     Char*12        Source name
       VAR%RA         Double         Right Ascension
       VAR%DEC        Double         Declination
       VAR%LII        Double         Galactic longitude
       VAR%BII        Double         Galactic latitude
       VAR%EPOCH      Real           Epoch of coordinates
       VAR%PROJ       Integer        Length of projection section
       VAR%PTYPE      Integer        Projection type (code)
       VAR%A0         Double         first coordinate of projection center
       VAR%D0         Double         second coordinate of projection center
       VAR%ANGLE      Double         position angle of projection
       VAR%X_AXIS     Integer        First projected axis
       VAR%Y_AXIS     Integer        Second projected axis
       VAR%SPEC       Integer        Length of spectroscopy section
       VAR%LINE       Char*12        Line name
       VAR%FREQRES    Double         Frequency resolution
       VAR%FREQOFF    Double         Frequency offset
       VAR%RESTFRE    Double         Rest Frequency
       VAR%VELRES     Real           Velocity resolution
       VAR%VELOFF     Real           Velocity offset
       VAR%F_AXIS     Integer        Frequency/Velocity axis
       VAR%BEAM       Integer        Length of beam section
       VAR%MAJOR      Real           Major axis of beam
       VAR%MINOR      Real           Minor axis of beam
       VAR%PA         Real           Position angle of beam
       VAR%SIGMA      Integer        Noise section length
       VAR%NOISE      Real           Theoretical noise
       VAR%RMS        Real           Actual noise
       VAR%PROPER     Integer        Proper motion section length
       VAR%MU         Real[2]        along RA and DEC, in mas/yr
       VAR%PARALLAX   Real           Parallax in mas
In addition, the following variables are also created when accessing GILDAS UV Tables through the DEFINE UVTABLE command:
       VAR%NCHAN      Integer        Number of channels
       VAR%NVISI      Integer        Number of visibilities
       VAR%NSTOKES    Integer        Number of Stokes parameters
       VAR%NATOM      Integer        Complex visibility size
       VAR%BASEMIN    Real           Minimum baseline
       VAR%BASEMAX    Real           Maximum baseline
VAR becomes a dummy variable of type header, which can only be referenced in a further DELETE /VARIABLE command. The VAR%item variables are ReadOnly or ReadWrite according to the keyword following the filename, except for the dimension variables (VAR%DIM and VAR%NDIM), which cannot be modified.

Full headers can be copied to one another, using the command

    LET A% = B%
which copies the header of image B into that of image A (dimensions are not modified, however). Thus a full copy of a 4 dimensions GILDAS data file can be obtained within SIC as follows:
    DEFINE IMAGE A Oldfile.gdf READ
    DEFINE INTEGER N1 N2 N3 N4 
    LET N1 A%DIM[1] 
    LET N2 A%DIM[2] 
    LET N3 A%DIM[3] 
    LET N4 A%DIM[4] 
    DEFINE IMAGE B[N1,N2,N3,N4] Newfile.gdf REAL 
    LET B A      !  Copy A data into B 
    LET B% A%    ! Copy A header into B header
    DELETE /VARIABLE B ! Deletes the SIC variables, but not the file...

A simpler (and more generic) way to declare new images is to use the size casting provided by the /LIKE option:

    DEFINE IMAGE A Oldfile.gdf READ
    DEFINE IMAGE B Newfile.gdf REAL /LIKE A  ! Define B like A...
    LET B A      !  Copy A data into B 
    LET B% A%    !  Copy A header into B header
    DELETE /VARIABLE B ! Deletes the SIC variables, but not the file...


next up previous contents index
Next: Character Variables and Implicit Up: Variables and Expressions Previous: GILDAS Images   Contents   Index
Gildas manager 2014-07-01