STORE AMPLITUDE

        CLIC\STORE AMPLITUDE [/BAND code] [/SELF]

    *** THIS HELP HAS NOT BEEN UPDATED FOR THE NGRX ***

    Store  the amplitude calibration determined by the last SOLVE AMPLITUDE.

    One calibration curve is stored for each sideband.  With  option  "/BAND
    code",  one  may  use  the  calibration curve determined with one of the
    sidebands (`code' is UPPER or USB, LOWER or LSB, or AVERAGE or DSB),  to
    calibrate both sidebands.

    With  option "/SELF", the calibration stored will not be the calibration
    curve (as determined from the last SOLVE  AMPLITUDE  command)  but,  for
    each  scan,  the visibility corresponding to the first subband set (eg.,
    SET SUB L01 to L03 ...); data from each side band will be used to  cali-
    brate  the same side band. This provide a simple, easy way to self-cali-
    brate data taken on strong continuum sources (quasars).

    STORE AMPLITUDE and STORE PHASE can be  performed  simultaneously  using
    STORE  AMPLITUDE  PHASE  [/BAND code] [/SELF] [/RECEIVER irec] (the /RE-
    CEIVER option has no meaning for amplitudes).